theme used in this modification is honda vario conceps low rider in 2009, which yesterday became the trend of modification that is very much in use scootter modifications lovers Indonesia. Apparently in 2010 there is still much like the trend of low-rider modifications. we can see very clearly that honda vario has a high body from the ground. now his body was once the land denat. honda vario many targeted modification of low-rider because the body honda vario is very good, and perfect for the modification of low-rider.
|
|
|---|
|
|---|
Showing posts with label scooter. Show all posts
Showing posts with label scooter. Show all posts
Aprilia Scarabeo 250 2010 Pictures Specification
Aprilia Scarabeo 250 2010 Specification
Aprilia Scarabeo 125ie 2010 Pictures Specification
Aprilia Scarabeo 100 4T2010 Pictures Specification
Aprilia Scarabeo 100 4T 2010 specification:
Honda Beat Off-Road Modification


Astra Honda Motor never shows the modification work on the Revo products. Today, Honda motorcycle manufacturer in Indonesia had returned to show through scooter New modification BEAT will initially join the launch of the New BEAT jazz standards on January 20 last (void regarding the death of President Director of PT Astra International, Tbk Michael D Ruslim).
The model adopted is a modification of a vehicle for exploring the natural (off-road). "The concept that we provide FACT, which is fun, active, and cross tracker. Thus, this modification can be followed by those who like adventure," commented Djalu Pratomo, Product Research AHM.
Viscous characteristic off-road look at the front sepatbor higher. In the framework below, there is nothing that a liaison between the engine and chassis front rake. "Instead, we made re-frame with steel pipe. Chassis is similar framework Underbone and certainly more robust," added Djalu. It looks more muscular after the chassis was made extending to the body.
Another strong impression was on the front foot that has adopted the model upside down. Although not fully until the triangle on the sporting kind, handsome impression was represented by variations shock absorbers.
Rear shock absorbers made mono models. Bottom holder who wears a steel plate above the crankcase. As for the top, explaining that the holder Djalu made from the same plate and located on the trunk.
Number two in the body attached to the side indicating BEAT is a modified variant of the Honda after the Revo.
The model adopted is a modification of a vehicle for exploring the natural (off-road). "The concept that we provide FACT, which is fun, active, and cross tracker. Thus, this modification can be followed by those who like adventure," commented Djalu Pratomo, Product Research AHM.
Viscous characteristic off-road look at the front sepatbor higher. In the framework below, there is nothing that a liaison between the engine and chassis front rake. "Instead, we made re-frame with steel pipe. Chassis is similar framework Underbone and certainly more robust," added Djalu. It looks more muscular after the chassis was made extending to the body.
Another strong impression was on the front foot that has adopted the model upside down. Although not fully until the triangle on the sporting kind, handsome impression was represented by variations shock absorbers.
Rear shock absorbers made mono models. Bottom holder who wears a steel plate above the crankcase. As for the top, explaining that the holder Djalu made from the same plate and located on the trunk.
Number two in the body attached to the side indicating BEAT is a modified variant of the Honda after the Revo.
2010 Yamaha Zuma 125



2010 Yamaha Zuma 125 Specifications :
Identification
Model Type Scooter
BASE MSRP(US) $3,190.00 Free Dealer Quote
Dealers Yamaha Dealers
Warranty 12
Insurance Get a Quote
Engine:
Engine Type Single-Cylinder
Cylinders 1
Engine Stroke 4-Stroke
Cooling Air
Valves 4
Valves Per Cylinder 4
Valve Configuration SOHC
Compression Ratio 10.0:1
Starter Electric
Fuel Requirements Regular
Fuel Type Gas
Transmission:
Transmission Type Continuously Variable (CVT)
Primary Drive (Rear Wheel) Belt
Wheels & Tires:
Front Tire (Full Spec) 120/70 R12
Rear Tire (Full Spec) 130/70 R12
Brakes:
Front Brake Type Hydraulic Disc
Rear Brake Type Drum
Technical Specifications:
Wheelbase (in/mm) 50.8 / 1290.3
Fuel Capacity (gal/l) 1.6 / 6.1
Honda PCX Scooter 2010 Picture

Honda PCX Scooter 2010 Picture
2010 Honda PCX scooter is able with high-tech 4-stroke 125-qm agent with aqueous cooling - a absolutely new architecture company. Especially engineers are appreciative of the minimum ammunition burning - 2 l. 100 km. This was accomplished mainly through the arrangement automatically stops the agent during abandoned time.
Thanks to cyberbanking ammunition bang arrangement PGM-FI, Honda PCX will accumulate the best accurate to date ecology standards of Europe and the USA. The amount of a scooter is not reported, but it should be absolutely affordable - to abate assembly costs, the assembly of the scooter will be acclimated for accepted Honda technology and components.
The actualization of markets in Japan, the United States and Europe scooter Honda PCX accepted already in 2010.
Thanks to cyberbanking ammunition bang arrangement PGM-FI, Honda PCX will accumulate the best accurate to date ecology standards of Europe and the USA. The amount of a scooter is not reported, but it should be absolutely affordable - to abate assembly costs, the assembly of the scooter will be acclimated for accepted Honda technology and components.
The actualization of markets in Japan, the United States and Europe scooter Honda PCX accepted already in 2010.
Modifikasi Yamaha Mio Dragster
Yamaha Mio Dragster Style Modification Picture:




Hendry Abah's quite a daring courage just to satisfy her wild ideas. Imagine, people from Pontianak, West Borneo was to Yamaha Mio 2006 contrived so drag style motorcycle. In fact, the gene that Yamaha Scooter, means only the following engine CVT was in use.
"We did have the intention to make an extreme change. Therefore, all the search form is not yet available, especially in Pontianak," said Abah. Perhaps it as the breakthrough idea.
Dr. modify X workshop, was forced to make a new chassis. Desai is also Abah still groping. The emphasis, he said, look sturdy and safe.
For the chassis using two Premium pipe size. For the largest size of 5 cm in diameter used in the rear. Because, besides its function as a place to sit, also handles the machine.
Another pipe, 3 cm in diameter with 3 mm thick for the front because the function and not as heavy load behind. Consideration of these two measures in order to remain pleasing to the eye and not too heavy.
Because without the cover body, in order to reduce the bare pipe, then in the middle of the constrained fit fuel tank 3-liter power. Suspension also completely revamped, to have retreated back 20 cm, rear self-moved. "Our position was placed in the middle of a bit to sleep. Construction is believed to be suitable for such body present," Abah said.
So also for the front. Rely upside down with a slightly tilted position. That way, added a rider's position Abah fit. Hollywood drag really.
"We did have the intention to make an extreme change. Therefore, all the search form is not yet available, especially in Pontianak," said Abah. Perhaps it as the breakthrough idea.
Dr. modify X workshop, was forced to make a new chassis. Desai is also Abah still groping. The emphasis, he said, look sturdy and safe.
For the chassis using two Premium pipe size. For the largest size of 5 cm in diameter used in the rear. Because, besides its function as a place to sit, also handles the machine.
Another pipe, 3 cm in diameter with 3 mm thick for the front because the function and not as heavy load behind. Consideration of these two measures in order to remain pleasing to the eye and not too heavy.
Because without the cover body, in order to reduce the bare pipe, then in the middle of the constrained fit fuel tank 3-liter power. Suspension also completely revamped, to have retreated back 20 cm, rear self-moved. "Our position was placed in the middle of a bit to sleep. Construction is believed to be suitable for such body present," Abah said.
So also for the front. Rely upside down with a slightly tilted position. That way, added a rider's position Abah fit. Hollywood drag really.
Fareastgizmos Honda CV-Matic- New Automatic Transmission
Honda has developed a new automatic transmission, the CV-Matic, which can be used in combination with Cub-style engines. The Honda CV-Matic, features a new cooling system developed on the basis of Honda's small-motorcycle automatic transmission technology, which protects the drive belt from the high temperatures it is subjected to. This enhances the durability of the drive belt and allows for the more compact design with a shorter distance between pulleys. Thanks to this advance, the positioning of the engine does not need to be significantly altered,

This new fully automatic transmission further enhances the practicality and convenience of the Cub-type models that have won fans worldwide, especially in developing countries. The new system will be available with Cub-style scooters to be released in the ASEAN region starting in 2010.
source: fareastgizmos.com
HONDA ELITE 2010 ELITE SCOOTER SPECS
If the Honda SH150i’s $4,599 price triggers sticker shock, the more affordable Elite might offer an appealing alternative. Priced at $2,999, the Elite is a third less expensive than the SH150i (with an engine that’s roughly a third smaller, too)—but like any bike, it’s got its own individual pluses and minuses.
I tested the Elite by criss-crossing over 50 miles of gridlock infested Los Angeles streets, and have a few thoughts on whether or not this 108cc scooter might work for you.Downsizing can yield great benefits, and the Honda Elite is a prime example of what can be gained from selective loss. Thanks to its liquid cooled, fuel injected 108cc engine, the saved space enables a considerably larger underseat storage area—35 liters to be precise, which is big enough to swallow two full face helmets, a notable improvement over the SH150i’s skimpy compartment. The Elite also gains a map box just beneath the instrument panel and a handy ignition key lock. Improved fuel economy is also another boon to the smaller package, and the Elite produces over 100 mpg based on EPA emissions testing. Curb weight is 254 pounds, 48 pounds less than the SH150i.
But something’s gotta give somewhere, and the Elite’s top speed is a little over 50 mph (versus the SH150i’s 65 mph.) Due to its sub-150cc status, the Elite isn’t freeway legal (at least in California), and while 50 mph is plenty fast for surface streets, the Elite immediately gets nixed if interstates happen to be a part of your riding routine.
Also notable are its small tires, which measure 10 inches at the rear and 12 inches up front—a significant drop from the SH150i’s 16-inchers… but more on that later. The Elite is equipped with a rear-to-front linked braking system and a parking brake, and available accessories include a top case which allows 27 extra liters of storage ($143.95), and a tall windshield ($189.95.) Also included is a transferrable one year, unlimited mileage warranty.
The Ride: City Street Manners,
The Elite’s saddle sits 29.1 inches above ground, and like the SH150i it only comes with a center stand (as opposed to a conventional side stand.) But lighter weight makes it less of a hassle to push off and get going—though you’ll also notice the scooter’s more compact proportions when you try to finagle room for your feet on the floorboard. It can take a bit of maneuvering for tall riders to get their feet, butt, and upper body positioned just right, and the Elite’s ergonomics are certainly biased towards in-town jaunts rather than longer distance rides.
Lane-splitting this little ride allows for fearless (but potentially risky) maneuvers that couldn’t otherwise be performed on a larger scooter or motorcycle. Acceleration isn’t most impressive right off the line, but it quickly spools up as momentum is increased. More impressive than the Elite’s “Go” is its “Stop”: the linked brakes feel strong, and their abilities make it tempting to go faster than you ought to in traffic. Likewise, the ten and twelve inch wheels add an element of darty maneuverability, though at higher speeds it takes a steady hand to keep the Elite along the intended trajectory. The chassis doesn’t feel quite as insulated as the SH150i’s, and road irregularities are transmitted more jarringly through the wheels and suspension.
More a nimble traffic jouster than a high-speed cruising machine, the Elite is well suited to the surface streets it’s relegated to due to its engine displacement.
The Bottom Line: A Zip and a Smile
Comparisons between the Elite and its stablemate the SH150i are inevitable, and choosing between the two depends entirely on your needs. The Elite isn’t freeway ready, but it does offer a slightly more maneuverable riding experience while slicing and dicing through traffic. The increased storage space is one welcome benefit of the smaller engine, but the bike’s clanky response to bumps are a not-so-gentle reminder of its diminutive suspension components and down-spec’d chassis. Looking outside the Honda brand, the Yamaha Zuma 125 offers slightly more displacement for the same price, but the Elite’s smoother flowing styling cues will likely steal some sales thunder from the quirky looking Yamaha.
After 50 miles of city riding, I returned the Elite with a grin on my face and a fuel gauge that only dipped down a couple of clicks. The Elite earns 3.5 out of 5 stars (which ties it with the SH150i), mainly since its advantages are counterbalanced by a few disadvantages. But budget-minded buyers who don’t need a freeway commuter will find that the $2,999 Elite is exactly what we seek in the scooter genre: sensible, efficient, and reliable two-wheeled transportation that can get us from point A to B with a zip and a smile
from: motorcycles.about.com/
Scooter Majesty Made In Indonesia
Have you ever seen a contrived skutik so big scooter (skusar) as Scooter Majesty? Well, Andit Kandiawan from Surabaya, East Java, successfully realize the basic ingredients of artificial Honda Vario 2008. Admittedly, Majesty was the inspiration to the formation of this skusar figure.Here, the most notable changes made to the body Andit. To be added bongsor, the framework of constrained delay in accordance with gede body that will be built. Central framework under floordeck a single 2.5-inch pipe size is not enough convicted.
"I'm looking for larger diameter pipe again, more or less 20 cm and then welded patent diselubungkan and use electric welding," he explained. To be even stronger, there is an additional booster of 2 cm-thick plates. Set up the welding plate to oppose the moment of the play so that the frame remains strong.
For body affairs, practically Andit "brake" when done. The reason, he was used to make car body modification. "Assembled themselves as the concept that mimics the Yamaha Majesty, including the design of a labored seat rather low imitate Japanese scooter big," said enthusiasts Honda CB200 and Kawasaki Binter this Merzy.
Design headlights made cool by using light framed CBR 900. Here, the element of luxury immediately apparent, especially with audio installed to add support for high-end features.
Because the car modif experience, this hero city builder to apply designs ever used in the car. One of them, oil catch tank. You know, the canister containing a filter to separate the heat and the usual oil applied to the flow modif Japan Domestic Market (JDM).
Low Rider dan Chopper MIO MODIFIKASI

Junaidi Saputra from Medan, North Sumatra, try to develop more low flow rider modifications. Indeed, judging from the look of his Yamaha Mio Sporty, a strong impression that only lengthen modifikator axle which is characteristic of low-rider. But, if the scrutiny right, there is an experiment that looked at it skutik garputala logo.
"As shown on the front and rear wheels, a long follow-up," said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.
Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters "H", here he made a model "J".
"To be strong due to rim and engine load, the material is taken from galvanized," he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.
To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.
Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a "V".
When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.
"As shown on the front and rear wheels, a long follow-up," said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.
Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters "H", here he made a model "J".
"To be strong due to rim and engine load, the material is taken from galvanized," he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.
To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.
Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a "V".
When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.
MODIFIKASI Yamaha Mio Retro Klasik

Scooter modification would not shift from low flow rider. Shallow, elastic axle tens of centimeters and used alloy car wheels. Meanwhile, Muhammad Sidik it out of the grip. Yamaha Mio 2007 made her just changed its form so the classical model.
Body reforms carried out using body Fino. In fact, the trend itself has emerged in 2007. However, Sidik do not care about people screaming. After all, the bike got him. He adds that support variation of motorcycles classic.
To conjure body replaced Mio Fino, Sidik had to spend approximately USD 6 million. When installation, Mio framework should be slightly modified. Because the body suggests a classic Fino, a variety of goods classic smelling body was stuck to.
Look rod exhaust, taken from the Honda CB100 found prints in Kebun Jeruk III. Once installed, it looks okay and does not affect a machine's performance is still the standard.
Because classical, on the back and front of the given rack. "If the front of his own design pure. Use 2 mm stainless steel," said Sidik. The rear rack that often mimic variations used Vespa community. "Classical and fit together a new body rada body fat like the Vespa," continued the new bride.
Another classic look at the model number of the police. Instead of cross, but parallel to sepatbor. Then, the front fitted with a windshield. Uniquely, if used a large size, this small size prints use and even looks like a visor. "Want to be different. So with the visor as a classic, but the sporty," he said. Size and design must be adapted to form a slightly rounded body that.
MODIFIKASI Yamaha Mio American Style

Another modification of the flow of new trends that will busy, ie, hot rod on skutik. "Contribution" is from a collaboration with Shaflingga Budi "Big" Rahmanto from Big Modification, East Jakarta. They conjure up a 2005 Yamaha Mio classic street rod style.
Consideration Agha-Shaflingga-friendly greeting as timeless and classic style ever be preferred. For example, he continued, could lyrics Fino body that proved many fans. This is different with custom body that would favor a moment.
The specialty of this modification is telling Fino combines a slim body with great legs. It's like the front is fitted with 4-inch wide tires, and rear 8 inches in diameter and 14 inches. "We want a slim body sustained significant leg. Therefore, deliberately ordered alloy wide soles," says this economics graduate.
Apply because the flow of hot rod (American style), design alloy wheels with a penchant for tailored adherents of this school in his native country, by wearing tight radius of up to 120 bar spending. Because there is a replacement rim, could not help but be a special drum made of aluminum material which dibubut logs.
To give the impression that the foot is used really big, so contrived skubek flat. That means the suspension system changed a bit. "Purposely constrained rigid front and back so that there is a distance enggak play. The goal, avoiding stuck between the body and wheels," said Agha.
Custom exhaust design reinforced pointed style. According to Agha, the model is copied from the Harley-Davidson magazine. Size adjusted body stay Mio. Budi enggak Agha and only focus on large section, but also improve bagaian detail.
Consideration Agha-Shaflingga-friendly greeting as timeless and classic style ever be preferred. For example, he continued, could lyrics Fino body that proved many fans. This is different with custom body that would favor a moment.
The specialty of this modification is telling Fino combines a slim body with great legs. It's like the front is fitted with 4-inch wide tires, and rear 8 inches in diameter and 14 inches. "We want a slim body sustained significant leg. Therefore, deliberately ordered alloy wide soles," says this economics graduate.
Apply because the flow of hot rod (American style), design alloy wheels with a penchant for tailored adherents of this school in his native country, by wearing tight radius of up to 120 bar spending. Because there is a replacement rim, could not help but be a special drum made of aluminum material which dibubut logs.
To give the impression that the foot is used really big, so contrived skubek flat. That means the suspension system changed a bit. "Purposely constrained rigid front and back so that there is a distance enggak play. The goal, avoiding stuck between the body and wheels," said Agha.
Custom exhaust design reinforced pointed style. According to Agha, the model is copied from the Harley-Davidson magazine. Size adjusted body stay Mio. Budi enggak Agha and only focus on large section, but also improve bagaian detail.
MODIFIKASI KNALPOT YAMAHA MIO


For daily use, Yamaha Mio Sporty appearance of this Purwokerto less unsightly. Modifications to impress without the concept and look busy. Siswo Winoto, builder of Win's Paddock, Purwokerto, Central Java, such as running out of ideas when working on the production 2008 Yamaha skutik this.
The reason, sejal Mio early experiments on this, he just wants to escape the flow of low-rider and hotrod. In fact, "I try to combine the concept of low-rider and hotrod. It makes matic fighter," said Win, Winoto Siswo close calls.
Win a fighter matic work is hardly a breakthrough because it is similar to streetfighter. Moreover, here will find trimming chassis, and lived 30 percent maintained the original framework, including komstir to down tube.
For the trellis model framework of the Ducati Monster is transformed into this skutik, Win spent a total of 9 meters pipes with different diameters. For the main frame, he wore a size 3.4-inch pipe 4.5 meters long, while for the buffer, it uses 1.5-inch pipe.
"Out pipe about 9 meters. All contrived mutual support. Sokbreker Includes rear support, it must be careful," said Win. He continued, if one construction, the burden of retaining the pipe can be bent sokbreker.
For finishing, so-so this process given thumbs-up. Detail and color composition formulated neat. However, it would be interesting if the back axle is not excessive, and the use of handlebars are not too wide.
However, there was an interesting time this bike out of smoke. Exhaust tip with a small hole-like automatic weapons-will spin.
The reason, sejal Mio early experiments on this, he just wants to escape the flow of low-rider and hotrod. In fact, "I try to combine the concept of low-rider and hotrod. It makes matic fighter," said Win, Winoto Siswo close calls.
Win a fighter matic work is hardly a breakthrough because it is similar to streetfighter. Moreover, here will find trimming chassis, and lived 30 percent maintained the original framework, including komstir to down tube.
For the trellis model framework of the Ducati Monster is transformed into this skutik, Win spent a total of 9 meters pipes with different diameters. For the main frame, he wore a size 3.4-inch pipe 4.5 meters long, while for the buffer, it uses 1.5-inch pipe.
"Out pipe about 9 meters. All contrived mutual support. Sokbreker Includes rear support, it must be careful," said Win. He continued, if one construction, the burden of retaining the pipe can be bent sokbreker.
For finishing, so-so this process given thumbs-up. Detail and color composition formulated neat. However, it would be interesting if the back axle is not excessive, and the use of handlebars are not too wide.
However, there was an interesting time this bike out of smoke. Exhaust tip with a small hole-like automatic weapons-will spin.
MODIFIKASI MOTOR-MOTOR MATIC
Many of us who like to modify the motor (modif), but many were not. The average claim made like a hobby instead. Even many who eventually became a maniac modif. Conversely, unhappy modif modif consider dangerous and lead to cost more (wasteful).
In fact, almost all motorcycles have been modified a little or a lot. Maybe people do not realize has been done modif because motors are still the standard view. Though a number of components has changed. Replace spark plugs a stronger, substitute a more comfortable handlebar, replace the lamp model is more cute and light is a simple modif. Therefore, the importance of the modification is the purpose and function. A good goal modifications is to improve the performance and appearance of the motor so it is more secure, convenient, fast, and style.
A good modification would normally use after market or import of waste motor copotan a better quality. More quickly because of the modifications, both machine capacity can be maximized, or the ability to control (handling) is more optimized.
2007 Yamaha Mio Hot Rod Modification

Hot rod. That flow of new modifications to the predicted skutik going to be a trend. As creatives who collaborate with Shaflingga Budi "Big" Rahmanto from Big Modification, East Jakarta. They conjure up a 2005 Yamaha Mio classic street rod style.
Consideration Agha-Shaflingga-friendly greeting as timeless and classic style ever be preferred. For example, he continued, could lyrics Fino body that proved many fans. This is different with custom body that would favor a moment.
The specialty of this modification is telling Fino combines a slim body with great legs. It's like the front is fitted with 4-inch wide tires, and rear 8 inches in diameter and 14 inches. "We want a slim body sustained significant leg. Therefore, deliberately ordered alloy wide soles," says this economics graduate.
Apply because the flow of hot rod (American style), design alloy wheels with a penchant for tailored adherents of this school in his native country, by wearing tight radius of up to 120 bar spending. Because there is a replacement rim, could not help but be a special drum made of aluminum material which dibubut logs.
To give the impression that the foot is used really big, so contrived skubek flat. That means the suspension system changed a bit. "Purposely constrained rigid front and back so that there is a distance enggak play. The goal, avoiding stuck between the body and wheels," said Agha.
Custom exhaust design reinforced pointed style. According to Agha, the model is copied from the Harley-Davidson magazine. Size adjusted body stay Mio. Budi not Agha and only focus on large section, but also improve bagaian detail.
For example, the engine was painted the same color as the main body. In fact, paint also grease the head lamp and the holder speedometer. Agha claimed satisfied, although they had to wait longer than five months. "New Style (at) modif skutik was born," he said proudly. (source: kompas.com)
Consideration Agha-Shaflingga-friendly greeting as timeless and classic style ever be preferred. For example, he continued, could lyrics Fino body that proved many fans. This is different with custom body that would favor a moment.
The specialty of this modification is telling Fino combines a slim body with great legs. It's like the front is fitted with 4-inch wide tires, and rear 8 inches in diameter and 14 inches. "We want a slim body sustained significant leg. Therefore, deliberately ordered alloy wide soles," says this economics graduate.
Apply because the flow of hot rod (American style), design alloy wheels with a penchant for tailored adherents of this school in his native country, by wearing tight radius of up to 120 bar spending. Because there is a replacement rim, could not help but be a special drum made of aluminum material which dibubut logs.
To give the impression that the foot is used really big, so contrived skubek flat. That means the suspension system changed a bit. "Purposely constrained rigid front and back so that there is a distance enggak play. The goal, avoiding stuck between the body and wheels," said Agha.
Custom exhaust design reinforced pointed style. According to Agha, the model is copied from the Harley-Davidson magazine. Size adjusted body stay Mio. Budi not Agha and only focus on large section, but also improve bagaian detail.
For example, the engine was painted the same color as the main body. In fact, paint also grease the head lamp and the holder speedometer. Agha claimed satisfied, although they had to wait longer than five months. "New Style (at) modif skutik was born," he said proudly. (source: kompas.com)
Honda PCX 125cc Cruiser Scooter

Honda will be introducing a new scooter archetypal for the ASEAN and all-around bazaar soon, alpha with Thailand area it will be produced. The new Honda PCX is powered by a 4-stroke water-cooled 125cc distinct butt agent that can do 50km per liter on the ECE 40 MODE cycle. It’s not activity to be cheap, as the PCX will be positioned as a high-end but high-value model. The Honda PCX appearance an “idling stop system” area the agent can shut off automatically back the scooter comes to a complete stop. This can advice save ammunition burning while you delay for a cartage ablaze or for whatever acumen you’re chock-full – cartage jams don’t assume to affectation that abundant of a botheration for these bikes.
MODIFIKASI HONDA SKUTER BEAT
Honda Beat The following modifications are still with the concept of Lowrider style to be used as a daily vehicle. We met in the workshop "Anugrah Motor" in Cibubur Point Automotive Center, as usual mas having Jay Honda motor scooter was another busy Beat to modify,to give final touches on a black motorcycle production in 2008 was.
Honda Beat specification modifications this time as follows::
* Framed rear wheels Daihatsu cars Custom Velg|Rims wearing radius 72 Ring 14 "wide 5", - the Ring 12 "wide 4".
* Tires 140/60 rear, 120/70 front tubles.
* Withdraw-withdraw 12 cm.
* Spion Custom.
* Motor brand Stang
* RPM Gauge.
* Shockbreaker YSS.
* Handle Pro brand brakes.
* Grip KTC.
* Custom Body Kit.
* Tromol original front brakes, front disc original.
* Footstep costom front rest.
* Front Fender (spakbor) Aprilia custom models.
* Custom front triangle.
* Koso air filter.
* Close the ICON fan.
* Exhaust Yamaha Fino cover.
* Close the LHK oil.
* Stirrup custom, visor Supra x 125.
HONDA VARIO CBS TECHNO

Vario Techno CBS sold with the price15.5 million rupiahs. Impressed indeed expensive, but from the features offered, such as liquid cooled and Combi brake (braking ease and set the brake distribution) to the exchange rate for this New product from AHM. Compared with the practical Vario Mio Soul Techno CBS is winning everything. Based on the fact that the Vario is more expensive relative to the same features already mio keteteran how when faced with the Vario Techno CBS.
Subscribe to:
Posts (Atom)











